Camera Support Q&A

Question 1

does this include 2 zacuto 15mm rods, one that goes into a male 1/4" 20 and one that goes into a male 3/8" 16?

Asked 4 ´years ago | Camera Support > Zacuto ZUD 3/8-16 ZUD3/8 16

Question 2

Do you sell replacement wheels for it?

Asked 4 ´years ago | Camera Support > Tether Tools Rock Solid Low Boy Roller

Question 3

When I bought this system why don't you have the Manual or a video on this system in how to set it up give somethin

Asked 4 ´years ago | Camera Support > Filmtools Medium Weight Pro-Kit Camera Mount for Cars

Question 4

I am wondering if this mount will work with a Surface Pro 7 tablet?

Asked 4 ´years ago | Camera Support > Matthews Studio Equipment Universal Tablet Mount (MUT) - Basic Kit

Question 5

Does the maximum payload of 50lbs include counter weight? So 50lb total. Or is the 50lb just for the camera package

Asked 5 ´years ago | Camera Support > Matthews Studio Equipment Elevator - Counterbalanced Elevation Tower

Question 6

I have a vest and arm that I bought several years ago, can I adapt my kit to my new gimbal ronin S2 with some parts

Asked 5 ´years ago | Camera Support > Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit

Question 7

What's the weight limit for this mount?

Asked 5 ´years ago | Camera Support > Filmtools VESA 100mm Monitor Mount w/ 4" Pin

Question 8

Does the 100mm vesa plate with the 6" 5/8 baby pin easily xxxx on and off? I'd like to leave the plate mounted but View answer

Asked 5 ´years ago | Camera Support > Filmtools VESA 100mm Monitor Mount w/ 6" Pin

Question 9

Does the film tools 75mm VESA Monitor Mount and 5/8 Pin work with the smallhd 1303 monitor? View answer

Asked 5 ´years ago | Camera Support > Filmtools 75mm VESA Monitor Mount and 5/8 Pin

Question 10

Does the Gripper 115XL have a 6" suction cup mount? View answer

Asked 5 ´years ago | Camera Support > Gripper 115 XL - The Filmtools XL In-Car Windshield Camera Mount w/ 3.5" & 6" Rod

Question 11

Does the cinesaddle come wiht the mounting kit? View answer

Asked 5 ´years ago | Camera Support > CineKinetic Marsupial CineSaddle

Question 12

Can I mount an ipad or an iPhone to this tripod - even if I need an additional accessory.

Asked 5 ´years ago | Camera Support > Sirui VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head

Question 13

I've got a question about the SHAPE Grip Relocator for Canon EOS C200, do you know if that works with the c300 hand View answer

Asked 5 ´years ago | Camera Support > SHAPE Grip Relocator for Canon EOS C200

Question 14

Will the Gripper 115 mount work with the Sony AX-53? View answer

Asked 5 ´years ago | Camera Support > Gripper 115 - The Filmtools In-Car Windshield Camera Mount

Question 15

Delkin Fat Gecko dual section mount: Is there an option with 3 suction cups? View answer

Asked 5 ´years ago | Camera Support > Delkin Fat Gecko Dual Suction Cup Mount

Question 16

How much weight can this Benro Video Hi-Hat with Bowl carry? View answer

Asked 5 ´years ago | Camera Support > Benro Video Hi-Hat with 100mm Bowl

Question 17

Whats the difference between the touch and go plate and the sideload plate for the sachtler? View answer

Asked 5 ´years ago | Camera Support > Sachtler Sideload plate S 0164

Question 18

Whats the difference between the touch and go plate and the sideload plate for the sachtler? View answer

Asked 5 ´years ago | Camera Support > Sachtler Sandwich Touch & Go Quick Release Adapter Plate 1091

Question 19

Just discovered the Steadimate, very impressive. I "�m curious to know if it will work with the Zhiyun Crane 3s? View answer

Asked 5 ´years ago | Camera Support > Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit

Question 20

does the benro slider have any motorized options? View answer

Asked 5 ´years ago | Camera Support > Benro MoveOver12 900mm Dual Carbon Rail Slider with Flywheel

Question 21

Does the slider need any attachments other than what comes standard with it to connect a DSLR and the motor system? View answer

Asked 5 ´years ago | Camera Support > Benro MoveOn10 Motion Control for MoveOver12 Slider

Question 22

How do you tighten the studs at the end of each arm? I see the nuts with 6 flats- does it require a wrench?

Asked 5 ´years ago | Camera Support > Kupo Max Arm

Question 23

Does this mount work to hold a Flanders 24" monitor to a C-stand? View answer

Asked 5 ´years ago | Camera Support > Filmtools Teenie Weenie 100mm Vesa Mount Nail on Plate

Question 24

TV Logic Mount for the LVM-071W "�does this work for the lvm-075a? View answer

Asked 5 ´years ago | Camera Support > TV Logic Mount for the LVM-071W 7" TV Logic Monitor

Question 25

Wondering if the dana dolly perm adapter allows for a shorter tripod head stud to fit. The regular 75mm ball adapte View answer

Asked 5 ´years ago | Camera Support > Dana Dolly "Perm" 75mm Adapter

Question 26

Will this work with a Zhiyun Crane 3S gimbal?

Asked 5 ´years ago | Camera Support > Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit

Question 27

Do the rods not connect into each other without the coupler? View answer

Asked 5 ´years ago | Camera Support > Zacuto Black Rod Male/Female 2"

Question 28

Does this work with the VESA 100mm and 75mm standards?

Asked 5 ´years ago | Camera Support > Matthews Monitor Mount for Baby 5/8" Spigot

Question 29

Matthews Studio Equipment Universal Tablet Mount (MUT) where exactly is the 1/4 20 hole? View answer

Asked 5 ´years ago | Camera Support > Matthews Studio Equipment Universal Tablet Mount (MUT) - Basic Kit

Question 30

is the 100mm ball head on the Sirui 30 compatible with a set of Satchler 100mm tripod legs? View answer

Asked 5 ´years ago | Camera Support > Sirui BCH-30 Broadcast Video Head

Question 31

what screws does the Matthews Monitor Mount for Baby (5/8") Spigot take? View answer

Asked 5 ´years ago | Camera Support > Matthews Monitor Mount for Baby 5/8" Spigot

Question 32

What's the weight capacity on the freedom car mount? View answer

Asked 5 ´years ago | Camera Support > Matthews Studio Equipment Freedom Car Mount System

Question 33

Does the XL provide a longer reach than just the regular 115? View answer

Asked 5 ´years ago | Camera Support > Gripper 115 XL - The Filmtools XL In-Car Windshield Camera Mount w/ 3.5" & 6" Rod

Question 34

Will this manfrotto monopod work with the rioch theta z1? View answer

Asked 5 ´years ago | Camera Support > Manfrotto XPRO Prime Base 3-Section Aluminum Monopod

Question 35

What is a stable and safe car mount for my DSLR and Ronin-S? View answer

Asked 5 ´years ago | Camera Support > Steadicam Steadimate-S Gimbal Collar & Base

Question 36

How long is average ship/delivery time length for this product? View answer

Asked 5 ´years ago | Camera Support > Benro Video Hi-Hat with 100mm Bowl

Question 37

How long do these G-Raid 2 Bay 8TB drives last? View answer

Asked 5 ´years ago | Camera Support > Redrock UltraCage Black Cine Bundle 15mm

Question 38

What is the max weight capacity? View answer

Asked 5 ´years ago | Camera Support > Matthews Studio Equipment Freedom Car Mount System

Question 39

Does this work with the VESA 100mm and 75mm standards? View answer

Asked 5 ´years ago | Camera Support > Matthews Monitor Mount for Baby 5/8" Spigot

Question 40

What is the difference between the s and sr models? View answer

Asked 5 ´years ago | Camera Support > Sirui P-424S Carbon Fiber Photo/Video Monopod

Question 41

Will this work with a Zhiyun Crane 3S gimbal? View answer

Asked 5 ´years ago | Camera Support > Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit

Question 42

How can a setup be arranged for filming with the Blackmagic Pocket Cine 4K camera on a car dashboard facing outward View answer

Asked 5 ´years ago | Camera Support > Gripper 115 XL - The Filmtools XL In-Car Windshield Camera Mount w/ 3.5" & 6" Rod

Question 43

Is there a quick release option for my camera when using the Gripper 115? View answer

Asked 5 ´years ago | Camera Support > Gripper 115 - The Filmtools In-Car Windshield Camera Mount

Question 44

Does the Removu R1 (sku 52039) work with the gopro max? View answer

Asked 5 ´years ago | Camera Support > Removu R1 GoPro LCD Control

Question 45

Could I switch from a 6" suction cup to a 4.5" cup on the Gripper 115 XL? View answer

Asked 5 ´years ago | Camera Support > Gripper 115 XL - The Filmtools XL In-Car Windshield Camera Mount w/ 3.5" & 6" Rod

Question 46

Is there a difference between D Tap power and P Tap? View answer

Asked 5 ´years ago | Camera Support > Tilta Nucleus-Nano Wireless Focus Hand Wheel Controller

Question 47

What is the intended use of the Modern 12" Camera Riser Mitchell to Mitchell? View answer

Asked 5 ´years ago | Camera Support > Modern 12" Camera Riser Mitchell to Mitchell

Question 48

For the Sachtler Pedestal C1 with pneumatic column with a tripod, and a 15 SB fluid head, are these 2 compatible? View answer

Asked 5 ´years ago | Camera Support > Sachtler Pedestal C l 4191

Question 49

What is package size and weight of Gripper Mini 494 - The Filmtools 3/8 4.5" Vacuum / Suction Cup Camera Mount? View answer

Asked 5 ´years ago | Camera Support > Gripper Mini 494 - The Filmtools 3/8 4.5" Vacuum / Suction Cup Camera Mount

Question 50

How do you tighten the studs at the end of each arm? I see the nuts with 6 flats- does it require a wrench? View answer

Asked 5 ´years ago | Camera Support > Kupo Max Arm

Camera Support Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools