Grip Rigging Equipment Q&A

Question 1

What are the approximate weights for 20', 12' segments of T6 speed rail? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 5'

Question 2

What's the best speed rail size to use? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 5'

Question 3

Does the speed rail qualify for free shipping if I purchase over $50 worth? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 5'

Question 4

What is the wall thickness on the 5/8 stainless steel rods?

Asked 4 ´years ago | Grip Rigging Equipment > Modern 36" Stainless Steel Rod 5/8"

Question 5

Can this be mounted with the window closed

Asked 3 ´years ago | Grip Rigging Equipment > Modern Equipment Deluxe Side Mount / Hostess Tray Car Camera Mount

Question 6

Are the spacing for the bolt on the cheese plate standardized or do you have to get specific brands that are compat

Asked 3 ´years ago | Grip Rigging Equipment > Modern Mini Ball Leveler

Question 7

How much space is between the pepe and the wall? Can another adapter fit over the Speed Rail and have enough space

Asked 3 ´years ago | Grip Rigging Equipment > Hollaender 1-1/4" Speedrail Fitting Number 52 Wall Flange

Question 8

What's the best speed rail size to use? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 15'

Question 9

What's the best speed rail size to use? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 2'

Question 10

On your 3/8 baby pin (12940), how long is the threaded section? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Filmtools Baby Pin with 3/8-16 Stainless Steel Male Thread

Question 11

Modern Equipment Fluorescent T8 Lamp Holder with 5/8" Pin and Rubber Clips: will these clips hold Astera Titan tube View answer

Asked 4 ´years ago | Grip Rigging Equipment > Modern Equipment Fluorescent T8 Lamp Holder with 5/8" Pin and Rubber Clips

Question 12

Does the Anderton dolly pin fit in the small post of a Yeager cart with the sticks holder attachment on it View answer

Asked 4 ´years ago | Grip Rigging Equipment > Anderton Dolly Pin (ADP) by Cardellini

Question 13

Filmtools Aluminum Baby Insert to 3/8-16 Male Kit: Comes with one or three? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Filmtools Aluminum Baby Insert to 3/8-16 Male Kit

Question 14

Question about Filmtools Equipment Stainless Steel Rod 5/8": Is there a product that can connect two of those rods View answer

Asked 4 ´years ago | Grip Rigging Equipment > Modern 36" Stainless Steel Rod 5/8"

Question 15

How much does this weigh? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment 2-4' Lightweight Telescoping Hanger w/ Pipe Clamp

Question 16

Does this have a 5/8 hole? Or is it only 3/8?

Asked 3 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment MICROgrip Head - 1.25"

Question 17

Hi I was curious to if you guys serviced or fixed the Matthews Studio Equipment Infinity Arm View answer

Asked 4 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment Infinity Arm

Question 18

Do you have access to speed rail that is made for humid and salty air enviroments? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 2'

Question 19

I'm looking for the 90 degree angle brackets to connect square aluminum tubing, this appropriate? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Hollaender 1-1/4" Speedrail Fitting #3 Elbow

Question 20

What is the difference between the two Hollaender Fitting 10 Cross fittings? View answer

Asked 5 ´years ago | Grip Rigging Equipment > Hollaender Fitting 14S Off Cross 1-1/4"

Question 21

what diameter besides 1-1/4 "these aluminium speed rail comes ? View answer

Asked 5 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 6'

Question 22

I am trying to figure out how this attaches to the cart Backstage Light Duty 9-24 lb Monitor Arm - Black. Do you ha View answer

Asked 5 ´years ago | Grip Rigging Equipment > Backstage Equipment Light Duty 9-24 lb Monitor Arm - Black

Question 23

I have an FS5, coudl this work as a reliable car mount for it? View answer

Asked 5 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment PRO Mount Car Mounting System

Question 24

is this 1-1/4" inside diameter or outside diameter? View answer

Asked 5 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 2'

Question 25

How can a DSLR be mounted onto a short arm, then mounted onto a truss? View answer

Asked 5 ´years ago | Grip Rigging Equipment > 9.Solutions Python Clamp with Grip Joint

Question 26

Which size of modern t-handle is needed to replace the screws on this product? View answer

Asked 5 ´years ago | Grip Rigging Equipment > Modern Baby Rigging Cross for 5/8" Rod

Question 27

What is the spacing between the two baby pins?

Asked 4 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment Baby Double Header

Question 28

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 2'

Question 29

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 4'

Question 30

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 12'

Question 31

What can I use to adapt the baby spud on my light stand to a male 1/4 20 xxxx ? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Kupo 5/8" Receiver 1/4-20 Thread KG004511

Question 32

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 5'

Question 33

I need to hang a lightweight LED light from a ceiling, is this a good product to use? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment Baby Plate - 3"

Question 34

Hi, what is the main difference and use case between 1-1/4" and 1-1/2" speed rail pipe? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 6'

Question 35

Where can I find a clamp to attach a 1-1/4 speed rail to a c stand. For using as a cross bar? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 6'

Question 36

Is the only finishing on the #3 Elbow Hollaender aluminum alloy? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Hollaender 1-1/4" Speedrail Fitting #3 Elbow

Question 37

do you have any spuds welded into a plate that I can xxxx into the wall? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Kupo Baby 3" Wall Plate Baby 5/8" Stud

Question 38

Are the holes on this Teenie Weenie Cheese Plate threaded ? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Filmtools Teenie Weenie Cheese Plate 3/8-16 Counter Sunk

Question 39

Can I use this to have a 5/8 pin drop down that I can attach a fixture to? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Modern Recessed Light Socket Adapter to 5/8"

Question 40

What is the jaw size of the Matthews Mini Matthellini Clamp? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment Mini Matthelini Accessory Tip for the Infinity Arm

Question 41

What is the outer diameter of the "Hollaender 1-1/4" Speedrail Fitting 70 External Coupling? View answer

Asked 4 ´years ago | Grip Rigging Equipment > Hollaender 1-1/4" Speedrail Fitting 70 External Coupling

Question 42

Correct size combo stand to hang 12' seamless paper View answer

Asked 4 ´years ago | Grip Rigging Equipment > Hollaender Fitting 45 Sq. Flange 1-1/4"

Question 43

Can this also be inserted as a 1-1/8" (stud) like a Stand Adapter? ( xxxx )? View answer

Asked 5 ´years ago | Grip Rigging Equipment > Filmtools TVMP / Bale Block : 5/8" Socket to 3/8-16 Socket

Question 44

Hi. Please, I want to know - the inner diametr is 31.75mm and what is outer diametr? What is thickness of wall? 4mm View answer

Asked 6 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 5'

Question 45

How is the "Filmtools Table-Top Mini Scrim Kit"meant to be used? Is it a kit of mini flags and diffusion to shape l View answer

Asked 5 ´years ago | Grip Rigging Equipment > Filmtools Table-Top Mini Scrim Kit

Question 46

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 6'

Question 47

Do you have anything in stock for adapting a tripod for use with lighting accessories, similar to this Manfrotto Sh View answer

Asked 5 ´years ago | Grip Rigging Equipment > Manfrotto Short 16mm Adapter Spigot with 1/4"-20 & 3/8" Female Threads

Question 48

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 8'

Question 49

If a specific size of speed rail is not available, how long does it take to get? View answer

Asked 4 ´years ago | Grip Rigging Equipment > 1-1/4" Speed Rail T6 Aluminum 10'

Question 50

Looking at the MSE Dutti Dolly. I am wondering, is it possible to use the Dutty with curved tracks? View answer

Asked 5 ´years ago | Grip Rigging Equipment > Matthews Studio Equipment 20 x 24" The Dutti Dolly - Green

Grip Rigging Equipment Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools